mctsign
11-26-2018, 09:48 PM
Hello,
We have the PRSAlpha and the VFD is not turning on/lighting up. Just cut a few letters and after loading the next set to cut, tried to turn the spindle on and nothing happened; noticed the VFD was not lighting up. I looked everywhere and people mentioned the contactor might be stuck so we turned off everything, opened the control box, and pressed the contactor. Turned the machine back on but VFD is still off. Didn't hear a click either but the contactor didn't seem stuck...
32273
Here's a picture of the contactor. The middle part was the only pressable part of it.
This hasn't happened before so we don't know what to do. It worked and then a minute later it didn't.:(
We have the PRSAlpha and the VFD is not turning on/lighting up. Just cut a few letters and after loading the next set to cut, tried to turn the spindle on and nothing happened; noticed the VFD was not lighting up. I looked everywhere and people mentioned the contactor might be stuck so we turned off everything, opened the control box, and pressed the contactor. Turned the machine back on but VFD is still off. Didn't hear a click either but the contactor didn't seem stuck...
32273
Here's a picture of the contactor. The middle part was the only pressable part of it.
This hasn't happened before so we don't know what to do. It worked and then a minute later it didn't.:(