Brian Harnett
12-29-2018, 09:18 AM
Did this post last month its a 8" square red Oak beam I drew up the outlines and did a 2d cut, then shaped the rest with die grinders it goes pretty fast. The finish is a base coat of linseed oil then 2 coats of Varathane satin water base floor finish sprayed on.
https://i.ibb.co/KqXZ8xS/DSCN4012.jpg
https://i.ibb.co/m0xzTJj/DSCN4006.jpg
https://i.ibb.co/hdP3FNc/DSCN4004.jpg
https://i.ibb.co/R2L1F40/DSCN4001.jpg
https://i.ibb.co/KqXZ8xS/DSCN4012.jpg
https://i.ibb.co/m0xzTJj/DSCN4006.jpg
https://i.ibb.co/hdP3FNc/DSCN4004.jpg
https://i.ibb.co/R2L1F40/DSCN4001.jpg