PDA

View Full Version : 2016 Desktop 18x24


pdauby
02-11-2019, 11:08 AM
Low low hour Desktop
1 hp spindle
Custom 1.5 inch billet vacuum plenum with vacuum gauge and ball valve
1 hp Becker vacuum pump. 11cfm @ 27.5hg
Grizzly dust collector
Heavy duty machine stand with control arm
Control PC with windows 7
Small machine vise
extruded table included
1/2 and 1/4 collets
A few modded actions/routines here and there in the SB control software and Vectric post.
$7500

32497
32498
32499
32500
pdauby
02-11-2019, 11:10 AM
Located in southern Indiana.
32501
pdauby
02-25-2019, 02:12 PM
Price Drop
$6850 for it all
pdauby
03-14-2019, 11:19 AM
Bring on the offers! Moving soon and would like to sell.
pdauby
03-28-2019, 11:08 AM
Reduced again $6000
pdauby
04-04-2019, 05:06 PM
Is no one interested in desktops?
rcnewcomb
04-05-2019, 01:59 PM
That is a good price.

I really like small machines. Unfortunately I don't have room for another.
scottp55
04-05-2019, 05:30 PM
I agree with Randall.
IF I didn't already have one...I"D be looking at it:)
scott
James Thompson
04-13-2019, 12:29 AM
Machine still available? Will you ship?
pdauby
04-15-2019, 10:56 AM
Yes, its still available. I may be able to help deliver based on location.
kickapoowoodworks
05-03-2019, 09:18 AM
Still available. How far are you from Henderson KY.
pdauby
05-03-2019, 10:00 AM
Yes it is, I'm about an hour away in Tell City IN
kickapoowoodworks
05-03-2019, 12:34 PM
Thanks PM sent
dryphi
05-21-2019, 11:41 PM
Off topic but, do you mind sharing the plans for that vacuum table setup?
Also where'd you get the cool table with the pins and the machining vise? Did that all come with that model?
pdauby
05-22-2019, 11:36 AM
Off topic but, do you mind sharing the plans for that vacuum table setup?
Also where'd you get the cool table with the pins and the machining vise? Did that all come with that model?

I machined the vacuum plenum table from a piece of precision jig plate. The vise come from Leading Edge Industrial. It is mounted to a plate I made that could be used/bolted down to the vacuum plenum table.
dryphi
05-31-2019, 12:32 AM
I machined the vacuum plenum table from a piece of precision jig plate. The vise come from Leading Edge Industrial. It is mounted to a plate I made that could be used/bolted down to the vacuum plenum table.

We already have a ShopBot but might be interested in the vacuum table, vise and aluminum plate if you're still looking to get rid of stuff.

If not, I'd still like to see the plans / files you used to make it.
Matt Dunkelberger
06-19-2019, 02:41 PM
Hi there, PM sent. Still available? I’m ready to buy and pick up.
pdauby
06-19-2019, 02:45 PM
Machine is Sold.
09brass
12-04-2019, 12:43 PM
Is this machine still available?