TJ
02-24-2019, 11:09 PM
Hello everyone,
Please join ShopBot Tools this Thursday February 28th, 2019 for a free online training. The topic this week is “Drawing Text.” The training begins at 1:00pm eastern time and runs approximately 45 minutes. It is then followed up by a 45 minute Q & A for participates to ask questions and work with each other.
32538
A lot of ShopBot projects involve text in some form or another. I have talked with several sign makers and asked them for their top tips in putting together this tutorial. This includes true type/single line text, adding new fonts, V-carve/raised text, wrapping text on curves/arcs, distorting and working with scripture fonts. Our training this week is full of information that will help you with any of your ShopBot projects that use text. If you are planning on participating in the Q & A portion and have a show and tell project of your own you would like to share with others please feel free to Email them to me ahead of time so I can include them in the presentation.
There is no need to sign up, just show up a few minutes early on Thursday and click on the link below. You will log into GoToMeetings and wait for the training to get started. Make sure your computer volume is turned on.
If you have any other questions please feel free to send me an Email. This training will be recorded and posted for future viewings. Those recordings can be found on our ShopBot Tools Training Page.
Thank you and we hope to see you there. Thanks, TJ
Drawing Text
Thu, Feb 28, 2019 1:00 PM - 3:00 PM EST
Please join my meeting from your computer, tablet or smartphone.
https://global.gotomeeting.com/join/679931429
You can also dial in using your phone.
United States: +1 (669) 224-3412
Access Code: 679-931-429
Joining from a video-conferencing room or system?
Dial: 67.217.95.2##679931429
Cisco devices: 679931429@67.217.95.2
First GoToMeeting? Let's do a quick system check:
https://link.gotomeeting.com/system-check
Please join ShopBot Tools this Thursday February 28th, 2019 for a free online training. The topic this week is “Drawing Text.” The training begins at 1:00pm eastern time and runs approximately 45 minutes. It is then followed up by a 45 minute Q & A for participates to ask questions and work with each other.
32538
A lot of ShopBot projects involve text in some form or another. I have talked with several sign makers and asked them for their top tips in putting together this tutorial. This includes true type/single line text, adding new fonts, V-carve/raised text, wrapping text on curves/arcs, distorting and working with scripture fonts. Our training this week is full of information that will help you with any of your ShopBot projects that use text. If you are planning on participating in the Q & A portion and have a show and tell project of your own you would like to share with others please feel free to Email them to me ahead of time so I can include them in the presentation.
There is no need to sign up, just show up a few minutes early on Thursday and click on the link below. You will log into GoToMeetings and wait for the training to get started. Make sure your computer volume is turned on.
If you have any other questions please feel free to send me an Email. This training will be recorded and posted for future viewings. Those recordings can be found on our ShopBot Tools Training Page.
Thank you and we hope to see you there. Thanks, TJ
Drawing Text
Thu, Feb 28, 2019 1:00 PM - 3:00 PM EST
Please join my meeting from your computer, tablet or smartphone.
https://global.gotomeeting.com/join/679931429
You can also dial in using your phone.
United States: +1 (669) 224-3412
Access Code: 679-931-429
Joining from a video-conferencing room or system?
Dial: 67.217.95.2##679931429
Cisco devices: 679931429@67.217.95.2
First GoToMeeting? Let's do a quick system check:
https://link.gotomeeting.com/system-check