roy_shimp
04-04-2019, 01:03 PM
electricians wired the new prs alpha. think my wiring is right. vfd white wire to c1, brown wire to f1. cycle thru estops then hit reset. go to spindle on. it displays 10,000 which in on the vfd panel. its in remote.
type in 8000 for rpm in rpm controller but 10,000 remains on the vfd panel.
router works real well for cnc work in local mode.
just can't control the rpm from the key board.
thank you
type in 8000 for rpm in rpm controller but 10,000 remains on the vfd panel.
router works real well for cnc work in local mode.
just can't control the rpm from the key board.
thank you