Swoodman
10-17-2019, 09:44 AM
Has custom 3/4" thick aluminium machine bed that does not warp with temp and humiduty swings like the plywood one Shopbot recommends, separated into 4 zones.
8" Z stroke
Pressure Z plate
Original invoice attached, should have all the info about the machine on it.
machine was $34,000
Aluminum bed was $1200
8 ISO30 tool holders at $170 each
assortment of bits
Oneida vortex dust collector $2200
Cost new totals $38,760
Asking 23,000
This does not include the Becker Vacuum pump!! I will sell it but it will be very close to the original price, plan on using it on another machine. The pump is 3 phase also.
8" Z stroke
Pressure Z plate
Original invoice attached, should have all the info about the machine on it.
machine was $34,000
Aluminum bed was $1200
8 ISO30 tool holders at $170 each
assortment of bits
Oneida vortex dust collector $2200
Cost new totals $38,760
Asking 23,000
This does not include the Becker Vacuum pump!! I will sell it but it will be very close to the original price, plan on using it on another machine. The pump is 3 phase also.