View Full Version : Problem with Version 10 post processors
Rick Reese
11-01-2019, 03:36 PM
Just upgraded to version 10.0 and now I have only two post processors for Shopbot (both for tool change). I've tried the migrating function under the "help" section, but it did not bring them over from version 9.5.
Is there an easy way to import the previous versions post processors?
Thanks for any help.
Rick
coryatjohn
11-01-2019, 04:49 PM
I had this problem as well. The simple answer is to copy them from 9.5. You can do this by going into 9.5 (or 9), and in the file menu, you'll see an option for app files. Open that, then go into the post processor directory and copy the SB ones. Then do the same with v10 and paste those files into the post processor directory. All good after that.
I'm not positive the indexer post processors are working correctly. I used 10 on an indexer job and it turned out very weird. I did it another way and got the job done so I don't know for sure what the problem was. No time to check it.
Rick Reese
11-01-2019, 05:25 PM
That did the trick. I appreciate your help.
Rick
pro70z28
11-01-2019, 09:10 PM
Is it better to stick with 9.5 for awhile until they come up with a fix. Or is 10 still worth the upgrade?
Rick Reese
11-02-2019, 12:56 PM
I held off at first on the upgrade because I didn't see the value for the few new features included with it. The new Photo V-Carve is nice, but I have a laser for that. Most of the changes in Version 10 seem to be improvements/fixes for existing features.
I finally upgraded because I realized that if I don't keep Aspire current, the cost to upgrade could be much higher in the future if they come out with some "must have" new features.
Rick
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.