EricSchimel
11-02-2019, 07:10 PM
Hey all, I've got a set of control cards for a ShopBot for sale. These were all pulled out of my fully working machine.
First up is a ShopBot motion control card. This board is a USB card that talks to SB3 and sends moves to your machine. Has SB standard DB37 connector so it can be plugged into ShopBot breakout boards.
It's a V201A:
33342
New MSRP $250.
Asking $125
Next up is a spindle speed controller. For those of you that have a spindle (NOT a router) and you don't have software control, this SB original unit will let you upgrade so that your spindle speed is controlled by SB3:
33343
New MSRP: $250
Asking $125
Next up is a ShopBot relay board. You can add this to your ShopBot to control external devices such as a router, dust collector or vacuum table (or even some lights to tell you your job is done!)
33345
MSRP $160
Asking $80
Lastly we have an RBK Board. This is a current generation board. Great if you need a replacement part, or are upgrading for some more modern SB features that aren't offered by the older boards.
33344
MSRP $350
Asking $175
All of these parts were used by me in my machine and are all working. They've seen less than 2 years in service. They'd make a great set if you're building a new control box, or refreshing an old one.
I'd sell them as a set, or individually. First come first served!
First up is a ShopBot motion control card. This board is a USB card that talks to SB3 and sends moves to your machine. Has SB standard DB37 connector so it can be plugged into ShopBot breakout boards.
It's a V201A:
33342
New MSRP $250.
Asking $125
Next up is a spindle speed controller. For those of you that have a spindle (NOT a router) and you don't have software control, this SB original unit will let you upgrade so that your spindle speed is controlled by SB3:
33343
New MSRP: $250
Asking $125
Next up is a ShopBot relay board. You can add this to your ShopBot to control external devices such as a router, dust collector or vacuum table (or even some lights to tell you your job is done!)
33345
MSRP $160
Asking $80
Lastly we have an RBK Board. This is a current generation board. Great if you need a replacement part, or are upgrading for some more modern SB features that aren't offered by the older boards.
33344
MSRP $350
Asking $175
All of these parts were used by me in my machine and are all working. They've seen less than 2 years in service. They'd make a great set if you're building a new control box, or refreshing an old one.
I'd sell them as a set, or individually. First come first served!