edcoleman
07-26-2020, 12:00 PM
Original Purchased 1999 - has been a real workhorse.
Selling only due to the fact that I need the space. $1500 - complete with:
1. PR96 96” x 48” x 6”
2. Unistrut Rack and pinion on all three axes (Z was originally ball screw, those parts are available)
3. Original control box w/ power supply
4. Shopbot 96” Steel table
5. Stepper Motors (pictured below)
6. Digitizing Probe and Z-zero plate.
7. Computer system running SB 2.32 control software
The only thing NOT included is the router motor shown in the photos below.System is completely functional and available. Buyer must be able to pick up or arrange transport from the southern New Jersey area.
-Ed
Machine overview:
http://www.talkshopbot.com/forum/attachment.php?attachmentid=33995&stc=1
gantry:
http://www.talkshopbot.com/forum/attachment.php?attachmentid=33996&stc=1
2x axis and 1 y axis steppers
http://www.talkshopbot.com/forum/attachment.php?attachmentid=33998&stc=1
z axis stepper
http://www.talkshopbot.com/forum/attachment.php?attachmentid=33999&stc=1
Selling only due to the fact that I need the space. $1500 - complete with:
1. PR96 96” x 48” x 6”
2. Unistrut Rack and pinion on all three axes (Z was originally ball screw, those parts are available)
3. Original control box w/ power supply
4. Shopbot 96” Steel table
5. Stepper Motors (pictured below)
6. Digitizing Probe and Z-zero plate.
7. Computer system running SB 2.32 control software
The only thing NOT included is the router motor shown in the photos below.System is completely functional and available. Buyer must be able to pick up or arrange transport from the southern New Jersey area.
-Ed
Machine overview:
http://www.talkshopbot.com/forum/attachment.php?attachmentid=33995&stc=1
gantry:
http://www.talkshopbot.com/forum/attachment.php?attachmentid=33996&stc=1
2x axis and 1 y axis steppers
http://www.talkshopbot.com/forum/attachment.php?attachmentid=33998&stc=1
z axis stepper
http://www.talkshopbot.com/forum/attachment.php?attachmentid=33999&stc=1