BowenJ
09-22-2022, 02:12 AM
I have a 2006 Shopbot with a 4x8 bed that served me well when I was an independent cabinet maker, but my career took a different path two years ago and it is finally time for me to pass it on to someone else who can make good use of it.
I bought it used in 2017 for about $13.5k all told, and I am asking $11k for it now, and it includes the Shopbot, vacuum hold-down system, dust collector, bits & spindles, the USB dongle for using it with the eCabinet design software, as well as the rest of the tools and accessories I used with it- basically, you get everything you need to get the CNC up and running, you just need to connect it to power and plug it into a computer.
Specs:
- 2006 Shopbot PRT Alpha 2.2HP HSD spindle Yaskawa VFD Serial # PRTA0000112006 000973
- Republic 7.5 HP single phase blower
- Air Drill with cables and carrier unit
- KUFO 2HP dust collector and 20 feet of heavy duty grounded 4" hose
- eCabinet Systems ShopBot Link USB dongle
I currently have the CNC stored in a garage that does not have the necessary power hookups to run it, but everything worked great the last time I used it, and I can provide "proof of life" videos from before I moved it if you wish.
The best way to reach me is to text me, ph# 801-856-9955. I am happy to answer any questions you may have, and can work with you to get the CNC to where you need it.
3514435143351413514235140
I bought it used in 2017 for about $13.5k all told, and I am asking $11k for it now, and it includes the Shopbot, vacuum hold-down system, dust collector, bits & spindles, the USB dongle for using it with the eCabinet design software, as well as the rest of the tools and accessories I used with it- basically, you get everything you need to get the CNC up and running, you just need to connect it to power and plug it into a computer.
Specs:
- 2006 Shopbot PRT Alpha 2.2HP HSD spindle Yaskawa VFD Serial # PRTA0000112006 000973
- Republic 7.5 HP single phase blower
- Air Drill with cables and carrier unit
- KUFO 2HP dust collector and 20 feet of heavy duty grounded 4" hose
- eCabinet Systems ShopBot Link USB dongle
I currently have the CNC stored in a garage that does not have the necessary power hookups to run it, but everything worked great the last time I used it, and I can provide "proof of life" videos from before I moved it if you wish.
The best way to reach me is to text me, ph# 801-856-9955. I am happy to answer any questions you may have, and can work with you to get the CNC to where you need it.
3514435143351413514235140