KurtR
01-23-2023, 10:11 AM
2007 ShopBot PRS CNC Router 48" x 96" (Running Acorn Control S, many upgrades, this has been a hobby machine not in a production shop. It has a new Acorn Controller, new stepper motors with planetary drives. It has been upgraded to a VHD Spindle. It has the center support upgrade installed. This gives the 2007 more support than a newer ShopBot as it has 5 cross supports now. Cable Trays and Cable Chain upgrades installed. Vacuum table installed and I am including a vaccuum pump that I built that works but is not meant to be the final solution. Spindle and Vacuum are wired to 220v.
I am including a new Intel Nuc Computer, Gen 10 I7 processor with 16 GB Ram, Large monitor, keyboard and mouse. I will include the lifetime Acorn License and a vCarve Pro license that is on the computer.
I have a set of wheels to be installed on the corners to allow it to be pushed around if needed. I have forks on my tractor and can assist with loading and disassembly if needed.
I am including the original control system, a fully functioning windows XP computer and monitor, all the original ShopBot stuff including steppers AND the Portal Cable Router. ALso a KRS pendant for the original software. Not that I think anyone will find much use for it, but it is yours.
https://imgur.com/a/1f4ohr2
I am including a new Intel Nuc Computer, Gen 10 I7 processor with 16 GB Ram, Large monitor, keyboard and mouse. I will include the lifetime Acorn License and a vCarve Pro license that is on the computer.
I have a set of wheels to be installed on the corners to allow it to be pushed around if needed. I have forks on my tractor and can assist with loading and disassembly if needed.
I am including the original control system, a fully functioning windows XP computer and monitor, all the original ShopBot stuff including steppers AND the Portal Cable Router. ALso a KRS pendant for the original software. Not that I think anyone will find much use for it, but it is yours.
https://imgur.com/a/1f4ohr2