PDA

View Full Version : PRSalpha control board for sale, excellent condition (Bridgeport, CT)



M_Bruno
04-18-2024, 06:23 PM
Removed from new-to-me PRSalpha 5x10 in the course of update to Acorn controller. I powered up tested all three axes prior to purchase, but couldn't test spindle operation as I did not have three phase power, only single phase. Which is to say, I believe this board to be fully functional but cannot warranty. It appears to be in perfect physical condition.

SB part number 001003 v0.7; processor daughter board v201A

35512
35513

Make me an offer. Buyer pays shipping, or picks up.

M_Bruno
05-04-2025, 12:43 PM
Bump, a year later. If no takers, I'll soon scrap it.

jerry_stanek
05-04-2025, 05:38 PM
That is a 4g standard board not an Alpha

M_Bruno
05-07-2025, 03:37 AM
That is a 4g standard board not an Alpha

Interesting. Everything else is Alpha, from the Oriental servo steppers/drives, to the "PRS-A" part number sticker on the control box, to the included manuals, but this is my first SB. Please educate me: what's the difference, and why would a standard board be in an Alpha machine?

ken_rychlik
05-07-2025, 07:37 AM
His description looks correct. It is not a 4g board. The Gecko drivers mount directly to the 4g board and this is not set up for that. I think the entire controller with drivers, motors, ect... would sell, but just the board would be understandable if it didn't sell.

M_Bruno
05-15-2025, 10:52 AM
Thanks for clarifying Kenneth