Speedset Errors

[danhamm@abccom.bc.ca]

Has anyone encountered this error, It has been bothering me for awhile now, at first I thought I
had fixed it as I changed the power supply it did have low voltage, it left for awhile, I have played with every speed imaginable on all axis,
and grounding and shielding, it is worse on some
files especially G-code generated versus sbp.files
I believe its a communication problem, but am unsure of its source.. any help apreciated..
also----HAVE A PEACEFUL JOYOUS HOLIDAY FULL OF
GOOD FAMILY FUN, GOOD FOOD AND GOOD FILES ALL..dh

[mark svenson]

Ground everything, I had this problem, and not until I grounded my computer to everything else did this intermitant problem go away

[danhamm@abccom.bc.ca]

UPDATE: problem solved I was using a pentium 233mmx and the I was getting speedset errors and
occasionly com-breaks, At the last so tried a diff
computer and problem was gone..end result was I
put in and old ISA IO board and it works just fine again..I guess the uart chips on the motherboard are getting flaky...

[heiligr@parkhill.k12.mo.us]

My x axis is running to slow or my y is to fast, one thing for sure they are not the same, How do I fix?