PDA

View Full Version : DOS memory problem on SB software.



shuttle
01-06-2002, 03:23 PM
My laptop, which ran the Shopbot, had a HD failure.
I got a cheap Pentium 60 with 16 megs of RAM & Win 95. SB229 installed ok, but now when starting SB I get a 'Not enough DOS Memory' message, so I am still without a machine.
Do I need more RAM or is there something in there that can be changed to get it to run?

thanks.

danhamm@abccom.bc.ca
01-06-2002, 05:14 PM
Are you starting it in windows or at the C:\ prompt.. if you are starting it in windows with only 16 megs of ram ..try exiting to dos or holding down the 'f7' key when starting up then goint to the c:\prompt.. if that doesn't work try loading the things in config.sys in high memory..
or autoexec.bat in high memory..