Resting Drivers / reset button (buddy)

[ramsey14580]

First thing I keep getting an error and a pop up message to rest the drivers. How do I do this?

Next, If I hold down the rest button I can move x and y but not z. the min. I let go of the reset button it shuts the machine down and tells me to check the input #4 E-stop

any help would be great!

[erik_f]

Check the temp of your drivers...see if any of them are over heating. If they are getting too hot they will go into a safety mode.

[ramsey14580]

I found out that the LED alarm light on the driver would not stop flashing so its on its way back to shopbot