HSD Spindle usage above 1000 m

[ironsides]

Here is a quote from the HSD Electro-Spindle operation Manual "Y580100001
Rev. 04"

"8 OPERATION OF THE ELECTRO-SPINDLE
8.1 CLIMATIC LIMITATIONS
Unless specified otherwise, all HSD electro-spindles are designed to operate within the following ranges:
• Altitude not above 1000 m above sea level"

My altitude in Northen Utah is about 4500 ft (1371.6 m)

Is my warranty on my soon to be delivered PRSalpha invalid?

George

[Gary Campbell]

George...
I am sure there are others at or above your altitude. That being said, ShopBot is the place to ask that question. We might be intersted in the answer though.

Gary

[jnbish]

Goerge,
Ive been using an HSD spindle for about three years in the Salt Lake valley, and had no problems at all.