4g upgrade everything backwards

[oddcoach]

hi all
Just installed the 4g board on my prt. Everything seems fine except all the axis are moving in the wrong direction. Do i need to reverse the wires on all the wago connectors? It seems if they are all backwards there might be a software fix or a switch on the board.
thanks
John

[Brady Watson]

John,
You can either switch the black and green wires (in only one connector on each motor end) and never have to look back...or change your unit values to a negative number, with the future head-scratching snafu being that if you ever have to input unit values again, or reset your configuration, you'll have to remember to switch the unit values back to a negative number. Personally, I would switch the wires around (ALWAYS with the power OFF) and be done with it...You only have to handle a total of 8 wires, so it's not a big deal...

-B

[oddcoach]

THANKS BRADY

[Buckeye Don]

John,
How is the upgrade working? Is the cut and speed a big difference? I want to upgrade mine soon.
Thanks Don