Continuous cut maximum commands

[olivier]

In the the manual, (p 68) it says :
"The continuous cut maximum commands should be between 1200 and 2400, if you have a lower number, ...you'll need to do some fussing with the Memory Settings in the Properties sheet of your startup icon."
OK. Now my number is 1801, could be OK but it does stop the cutter quite often, and I know from a previous configuration of my computer that it could be better.
So what are the "fussing" to be made as described above ?

Thanks for you help.

Olivier

[davenadeau]

Olvier,
You can make large changes in the Continuous Cut Maximum Commands value by remarking out unneeded drivers being loaded in autoexec.bat and config.sys files. Likely drivers to remark out include CD-Rom drivers and sound blaster card drivers.