les_linton
03-13-2005, 11:43 PM
Hello everyone. Just got the PRT off the trailer and inside and am getting ready to do some work.
One of the first things we are working on will be raised panel doors using MDF.
I have been looking at DoorBot and am pretty interested in the software as something that we can use to get us going without spending a fortune. Wes has given me a lot of information, but what I would really like to know is what some of the user have to say about it.
I would appriciate it if you could send me an email, pro or con, on the software and how user friendly it is.
Thanks for your time and help and look forward to reviewing your information.
Les Linton
dovetail_7@grics.net (mailto:dovetail_7@grics.net)
One of the first things we are working on will be raised panel doors using MDF.
I have been looking at DoorBot and am pretty interested in the software as something that we can use to get us going without spending a fortune. Wes has given me a lot of information, but what I would really like to know is what some of the user have to say about it.
I would appriciate it if you could send me an email, pro or con, on the software and how user friendly it is.
Thanks for your time and help and look forward to reviewing your information.
Les Linton
dovetail_7@grics.net (mailto:dovetail_7@grics.net)