DoorBot 2 user questions

[les_linton]

Hello everyone. Just got the PRT off the trailer and inside and am getting ready to do some work.

One of the first things we are working on will be raised panel doors using MDF.

I have been looking at DoorBot and am pretty interested in the software as something that we can use to get us going without spending a fortune. Wes has given me a lot of information, but what I would really like to know is what some of the user have to say about it.

I would appriciate it if you could send me an email, pro or con, on the software and how user friendly it is.

Thanks for your time and help and look forward to reviewing your information.

Les Linton
dovetail_7@grics.net (mailto:dovetail_7@grics.net)

[davidp]

I have used doorbot and It is dead easy to produce doors from MDF using it. If your shopbot is set up accurately it will produce perfect doors everytime.

as an aside I have had a few problems with door bot as it was originally written for the minority of the world who persist in using imperial measurement, but Wes god belss him has resolved nearly every one of those problems.

[alabama_davo]

Great program...easy to use and super results. Square OUTSIDE corners are hot and a real selling point.
Wes is also very good with support. I highly recommend the software.