jerryk
04-27-2009, 08:47 AM
Fellow botters,
years ago, when I first purchased my shopbot PRT, I opted to purchase and use RAMS3D as my vector processing and shopbot code writing software. Now it appears that RAMS is defunct and they have left me high and dry, so I need to bring myself up to speed on other software. From what I have read here on the forum, it appears that I should be looking at Partworks(Vcarve Pro). While I may dabble in 3D, I don't think I want to upgrade to Aspire at this time. I do most of my design work in CorelDraw and would import eps or dxf files into partworks. Do you concur or have other ideas to suggest.
Thanks
years ago, when I first purchased my shopbot PRT, I opted to purchase and use RAMS3D as my vector processing and shopbot code writing software. Now it appears that RAMS is defunct and they have left me high and dry, so I need to bring myself up to speed on other software. From what I have read here on the forum, it appears that I should be looking at Partworks(Vcarve Pro). While I may dabble in 3D, I don't think I want to upgrade to Aspire at this time. I do most of my design work in CorelDraw and would import eps or dxf files into partworks. Do you concur or have other ideas to suggest.
Thanks