Setting the start point in Partwizard, version 2

[richards]

Following the directions in the PartWizard V.2 manual, I can't set the start point on most of my designs. The start point menu selection remains grayed out. Any suggestions?

[paco]

Select line or shape you wish to deal with, use nodes editing tool(just at left from select tool), right-clic on the node you wish to use as start point and select start point in right mouse menu... This should work...

[frank]

Michael,

If the selection is grayed out then you probably don't have a closed vector and you are trying to select a point that isn't either the first or last point on the line. If you close the vector then you should be able to select any point as a start point.

[paco]

Hey Frank!
Got my last e-mail?...

[richards]

Frank,

Thanks. I had several open vectors in various drawings.

I've been importing dxf drawing from AutoCAD Lite into PartWizard v.2 and it looks like I'm doing something wrong with the fillet option in AutoCAD that causes the vectors to open.

Mike