mwpfeifer
12-24-2008, 12:22 AM
Discovered a rather inexpensive cutter that I'm having good results using to surface the spoilboard and warped boards. It's a Katana # 18850 from MLCS. Goes for $39 and is 2 inches in dia, with a 1/2" shaft. Check the following link:
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/katana_bits9.htm#kat_drawer_lock_anchor
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/katana_bits9.htm#kat_drawer_lock_anchor