Autocad 2004 drawing of an ARC to Choppy - how to smooth it out?

[teddy27]

I have a drawing that consists of multiple arcs /poker table that I import into Parts Wizard 2 and apply the toolpath create my shopbot file.

When I import it into to partwizard I notice that the arc is not smooth - it looks very choppy around the edge. So naturally when I apply the toolpath and cut it I get a choppy looking cut.

Is their a way to smooth the arc? in autocad or in Partwizard. I have provided the drawing in autocad for all to veiw.

thank for any help.
Ted
arc drawing in autocd

5067 (19.3 k)

[evan]

In AutoCad pull down the Tool menu and select Options; select the Display tab; change the display resolution for the Arc circle smoothness to a higher number and apply. Hope this helps:

5068

[teddy27]

Thanks for the help

I had to change the lines to polylines