View Full Version : New 4" dust foot
bud_olsen
03-18-2007, 09:27 PM
This is some thing I worked on over the weekend, a new 4" dust foot, it will not win a contest for the best looking but I think it will work just fine!The forum will not let me post some pics of it.
Bud
harryball
03-18-2007, 09:29 PM
Email the .jpg file to me, I'll resize and post it. robert at bentfork dot com
Robert
bud_olsen
03-18-2007, 09:37 PM
Robert
You have mail!
Thanks
Bud
harryball
03-18-2007, 09:58 PM
And here it is....
5322
menewfy
05-16-2007, 08:01 PM
well this looks like a real nice design how well does it work for you?
is it always at the bottom it looks like it does not move up and down?
what vacuum do ou have hooked up to it?
thanks in advance
Tim
jamesgilliam
05-17-2007, 12:38 AM
Bud, Great design on the dust skirt! Looks like you are running a PRT also. I am about to re think our skirt and may copy yours, but the one I made now has a plexiglass window where the bit goes through so I can see what is going on. And I will probably do that also on the new one.
jhicks
05-17-2007, 10:04 AM
Looks good Bud. Did you see a significant improvement on MDF dust after going from 2" input to 4" pipe?
bill_l
05-17-2007, 07:58 PM
Bud,
Where did you acquire the strip brush?
Bill
weslambe
05-17-2007, 08:37 PM
www.mcmaster.com (http://www.mcmaster.com) page 1197
It's called a conveyor strip brush.
harold_weber
05-17-2007, 09:05 PM
Try searching for Frost King #C35P manufactured by Thermwell. It looks just like the one in the photo above....
Its a brush type door sweep, and it used to be sold at Home Depot (maybe it still is).
If you search here, use the key phrase "brush door sweep", you will find several discussions.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.