View Full Version : Need Remote Pendant Plans
Brady Watson
06-03-2004, 09:51 PM
I've looked all over the place for the remote pendant wiring scematic/plans for DOS and cannot seem to find it anywhere...or on the SB site.
Can anyone point me in the right direction or e-mail them to me?
TIA!!!
-Brady
paul_n
06-03-2004, 10:21 PM
Brady,
Look in the FILES TO DOWNLOAD, under ACCESSORIES,
under OVERVIEW.
Paul
Brady Watson
06-03-2004, 10:30 PM
Paul,
I have that in my SB manual...that's not what I am looking for. I know that I had the actual schematic for the pendant itself around somewhere & I think that it was available for download on the old SB site.
It listed the Radio Shack part numbers and showed a wiring diagram for hooking up each button. I know it exists because I started it a year ago and am just getting around to hooking it up after locating some 5 conductor wire.
Anyone have the pendant plans?
-Brady
daveiannone
06-03-2004, 11:02 PM
Brady,
You are right , it did used to be there...I built one a couple years back...I'll check at my shop tommorrow to see if I have the plans...
just a note - I have not used mine since I made it..switching between X,Y & Z was a hassle so I bought a 25' extension cable for my keyboard--works great
Dave
Brady Watson
06-03-2004, 11:03 PM
Thanks Dave!
-Brady
Brady, I just looked through everything on my computer at home it is not there. I know I have it some where. I will look in the computers when I get to the shop in the morning. If I don't have it electronicly I do have it in hard copy. I will scan it in if no one else can come up with a copy.
Jay
Brady Watson
06-03-2004, 11:32 PM
Thanks!
That's something that's good to keep around!
-Brady
srwtlc
06-04-2004, 02:09 AM
Brady and Jay,
I have what your looking for right in front of me. Paper copy and a pdf (Adobe Acrobat), but the pdf is almost 5mb. I can split it and send it to you in pieces, then you can rejoin it, if you would like. (Dial-up
)
Let me know.
Brady Watson
06-04-2004, 10:03 AM
I would appreciate that!!!
Brady Watson
06-04-2004, 01:39 PM
Got it!
Thanks!
-Brady
kivimagi
06-04-2004, 02:34 PM
Brady can you post the .pdf somewhere? Or email to me and I could possibly put it somewhere.
Regards,
Brady Watson
06-04-2004, 03:25 PM
Ryan,
Send me an e-mail and I will forward you a copy. I don't have an FTP setup so I can't post it anywhere for download.
-Brady
PS- Your e-mail address is not listed in your profile.
jay_p
06-07-2004, 03:12 PM
I thought that this file existed somewhere, and I had been looking for it too. If someone could forward the pdf to me, I would appreciate it.
Thanks,
Jay
kivimagi
06-07-2004, 04:25 PM
www.kivimagi.com/shopbot/documentation (http://www.kivimagi.com/shopbot/documentation)
Let me know if you have any troubles.
jay_p
06-07-2004, 04:45 PM
Than you Ryan. It's all there.
Jay
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.