Help with Prismatic Letters

[signtist]

I’m trying to route Prismatic Faced Letters.
I only have V-Carve Pro and ShopBot software.
I’m trying to find someone who can take my file
(usually 1 or 2 words) and create a file that I can
cut on my machine, using a 110 degree bit.
I’m not trying to cut with a ball end bit.

I can pay with Visa Card or check or whatever
payment you prefer.

This can be on ongoing little project as my 1 man
sign shop takes orders.
The first one may require me to phone you a few
times just to make it easier.
If anyone can help, please contact me.
Or is there a company that does this?
Thanks in advance John Arnott
signgraphics1@aol.com (mailto:signgraphics1@aol.com)
www.signgraphics1.com (http://www.signgraphics1.com)

[jd_graphics]

John,

Since you only intend to use a v-bit, you can do this yourself in V-Carve Pro...I do quite frequently. In your file, route out your letter around the outside with whatever cutter you're using(up/down/compression bit), then make another toolpath with your v-bit, cutting on your vector line, to whatever depth. You'll need to play around with it a bit to get the settings to your satisfaction, but it's not that hard to do.

Justin

[joe]

Howdy John,

Send me the copy, it's size, the font and I'll guide you through the process.

Feel free to call if you like. It's been a long time since we've talked.

Joe