joewino
09-21-2006, 05:48 PM
After having our new ShopBot for over three months, we finally got everything assembled, hooked up and adjusted. Today we ran our first job and already know that this is going to be one of the best investments I ever made.
The job was just some simple cut-out shapes of our high school's mascot (Wildcat)in MDO but the SB made the job look like child's play. The cuts were smooth and took little sanding, mainly just to knock off the sharp corner. It saved us hours of cutting by hand.
Now the fun begins. I may even develop into as good a signman as that old guy Joe Crumley.
The job was just some simple cut-out shapes of our high school's mascot (Wildcat)in MDO but the SB made the job look like child's play. The cuts were smooth and took little sanding, mainly just to knock off the sharp corner. It saved us hours of cutting by hand.
Now the fun begins. I may even develop into as good a signman as that old guy Joe Crumley.