PDA

View Full Version : Finished Today


joe
08-24-2009, 08:56 PM
19' Isoceles Triange ready for customer pick-up.


5798
5799


5800
lstovall
08-24-2009, 09:32 PM
Absolutely Stunning!!
JohnG
11-20-2010, 07:44 PM
Sorry to dig up an old thread, but......:D

Found this one, and wanted to hear more about the fabrication of this triangle.

Very nice Joe.
joe
11-20-2010, 08:03 PM
John, it's easy work except for the size.

The frame was angle iron with DiBond background. I hoppered the surface with acrylic texture. To make sure the letters had a good base to set on, I placed a mask down for a smooth clean surface. The letters and tree were routed from Extira and sprayed with Sculpt Nouveau Copper. It was shipped to Frisco Texas.

One technical note.

I was very concerned there would be cracks with the DiBond seames. I epoxied supports in those area's of concern.

Thanks for the question.

J
joe
11-20-2010, 09:09 PM
John,

I was wandering how you found this old post. It prompted me to see some of the posts of the past but couldn't find any photo's. I know I've put lots of them on the forum over the years. Just wondering where they are?

I'd appreciate your assistance.

Joe