View Full Version : Where to find - Wall Mount Studs
kivimagi
11-29-2005, 11:39 AM
Hey Folks,
I'm looking for a source of the small plastic studs that can be depressed into wallboard to hang signs, banners, letters, or whatever else.
I've tried google, but I must not know the actual name of them.
Regards,
richards
11-29-2005, 11:45 AM
Try Googling 'toggle bolts'. Here's a site that I found: www.toggler.com (http://www.toggler.com)
kivimagi
11-29-2005, 12:02 PM
Mike,
Thanks.. That isn't what I'm after. I want them to be mountable from the back, and have a space between the wall.
kerrazy
11-29-2005, 12:23 PM
Ryan,
depending on what you are hanging, 1/8 inch threaded stove bolts with the head removed, fitted with a 1/8 in inside diameter clear tubing will give you a stand off, for say pin mount letters.
Dale
Andy (Unregistered Guest)
11-30-2005, 04:38 AM
Ryan,
You need sign makers "locators"- clear acrylic nipple that glue to the back of your letter and a plastic cup that you screw to the wall- nipple snap fits into cup.
I have these in standard and Jumbo versions.
If you get stuck I can supply you with a box
(if you need metal fixings have a look at one of our sites- www.signsupports.co.uk (http://www.signsupports.co.uk)
Cheers
Andy
kivimagi
11-30-2005, 09:36 AM
Andy,
I think I'm on track now, but clear acrylic nipple on google sends me to some "choice" websites. Piercings, etc etc
Any idea of a supplier in the US, I thikn I've narrowed the name of the product down to pad mount hardware.
Regards,
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.