Frustrated with fonts

[godsman24_7]

I am getting quite frustrated with trying to figure out how to carve different fonts. I really like the fonts many of you guys are using but I dont understand how you are carving them. All the fonts that I can find are double line fonts and when I go to carve them using a v-bit I get two lines that look horrible. I was at the Kansas camp where Joe had an awesome sign that was v-carved using a 120 degree bit and I loved it. Any clues as to where or how you guys are getting the single live fonts or how you vcarve the sharp looking fonts would be much appreciated. Thanks

[bleeth]

John: If you are running PW software there are a limited number of fonts that can be v-carved. Artcam Insignia or Pro or other more sophisticated software such as V-Carve Pro is required for successful v-carving of fonts.
The stronger software programs essentially convert the "double lines" of most fonts to a "limit border" and carve down the middle. In Artcam Pro you get to see the vector generated when selecting the v carve option. Others can speak for other software.

[godsman24_7]

Thanks for the help dave