joewino
11-27-2006, 04:30 PM
This is a job that we just completed. The city of Harker Heights - not far from here, called and wanted a dimensional sign of their town logo to be placed on the front of a podium used for new conferences, town meetings, etc.
The panel is 10" x 14", with the capital letters being about 3" tall. Colors were chosen by the city. It is a little hard to see in the photo, but the star is prismatic and the background has a wavy texture(kind of like a smooth peeble look)
All the letters, star and the background details were done on my ShopBot in 30# Precision Board. The dust was blown off and everything was painted with rattle cans...no sanding. After drying overnight, I just glued everything together with clear silicone.
While it is not the most creative project we've ever done, it does show the detail that ShopBot can cut to and how a plain logo can be spruced up with just a little detail work on the background.
6335
The panel is 10" x 14", with the capital letters being about 3" tall. Colors were chosen by the city. It is a little hard to see in the photo, but the star is prismatic and the background has a wavy texture(kind of like a smooth peeble look)
All the letters, star and the background details were done on my ShopBot in 30# Precision Board. The dust was blown off and everything was painted with rattle cans...no sanding. After drying overnight, I just glued everything together with clear silicone.
While it is not the most creative project we've ever done, it does show the detail that ShopBot can cut to and how a plain logo can be spruced up with just a little detail work on the background.
6335