knight_toolworks
08-30-2009, 06:13 PM
the link below shows the building and the wacky bracket to hang the sign from. the one of the signs I saw hung was a lighted sign that was attached to the frame from one end and a bar went from the opposite end to the top of the bracket.
so is this the best way to mount the sign?
the sign will be a simple black background with sintra letters. so the only real weight will be the background.
the background is what I want to work out. I was thinking of mdo with all the voids filled then two coats of primer and painted with good paint 2 or three coats. a metal bracket on the one end and a metal strip with a hole for the far end support.
I just use 1/4" holes in the sign face and not through holes in the letters to locate them. this is fasten the pocketing.
http://i154.photobucket.com/albums/s266/knighttoolworks/ALO/32ohm_Audio_front.jpg
so is this the best way to mount the sign?
the sign will be a simple black background with sintra letters. so the only real weight will be the background.
the background is what I want to work out. I was thinking of mdo with all the voids filled then two coats of primer and painted with good paint 2 or three coats. a metal bracket on the one end and a metal strip with a hole for the far end support.
I just use 1/4" holes in the sign face and not through holes in the letters to locate them. this is fasten the pocketing.
http://i154.photobucket.com/albums/s266/knighttoolworks/ALO/32ohm_Audio_front.jpg