View Full Version : Number of passes question....
nodnerb
10-20-2007, 12:00 PM
Hi. I was wondering where I can choose how many passes the machine takes for a cut. Right now I am just trying to practice in foam so I don't need the 10 or so passes the software calculates or defaults to. What am I missing here.
thanks.
dubliner
10-20-2007, 12:20 PM
divide the thickness of the material by the number of passes youd like to make, eg .75 inch in 3 passes of .25
nodnerb
10-20-2007, 12:36 PM
ok, but where do I enter the value defining 3 passes? Do I enter 0.25 in the stepdown field for the example you gave?
thanks.
knight_toolworks
10-20-2007, 01:00 PM
right the stepdown is what you use for how deep you cut on each pass. learn it well it is your friend (G)
pappy
10-31-2007, 10:37 PM
When you select your cutting tool click on edit and in the top right hand corner there is a space for stepdown.......enter it there.
billp
11-01-2007, 01:02 PM
Doug,
The e-mail address in your profile isn't working. Please drop me a note with your current address off line when you get a chance, Thanks ! Bill P.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.