Could Anyone be nice enought to help me with a simple item?

[mikcvr]

i NEED A BOX 8IN SQUARE AND 4FT TALL BUT I NEED THE CORNERS OF THE BOX TO HAVE THE SPECIAL STEPPED BOX JOINT WITH THE DOVETAIL LIKE TABS THAT IS LIKE THE BOXES CREATED WITH PROJECT WIZARD, IT HAS TO BE OUT OF 3/4 IN MATERIAL, I'VE SPENT HOURS IN PART WIZARD DRAWING AND TOOL-PATHING AND I JUST CANT SEEM TO GET IT RIGHT, COULD ANYONE OFFER SOME HELP TO A GUY JUST LEARNING TO DRAW? MABY DRAW IT FOR ME LOL, I KNOW THAT'S THE EASY WAY OUT BUT IF I COULD COMPARE IT TO THE HOURS OF WORK I PUT INTO MINE MABY I COULD SEE WHERE I WENT WRONG, AND MABY I COULD MAKE SENSE OF THE CODING PATTERN ENOUGH TO DO THIS MYSELF WITH PLAIN CODING.

[ron_varela]

Mike you might have better luck doing it in a cad program then import it into Partwizard to do the toolpath.

Ron

[myxpykalix]

What i recall of that joint it seems to me it was meant to be longer than the 3/4" surface area you would have for glue up. Maybe if you posted a drawing in a paint program or sketched it up to give me a better idea of exactly what you want i could help you in some way. What is the importance of having the stepped joint on the edges? You can send any material to my email as there is a 50k limit here