I could use help with this file.

[knight_toolworks]

a fellow sent me this dwg file it would not import. another fellow told me it was a 3d file and converted it and sent me a vcarve version. but when I size it to 76.375" x 19.25 it comes out to about 22" on the short side. so something is wacky. this is the first time I resized something and one side was wrong. I could of course change the side to big to the right size but the fellow said it did not quite look right.
http://www.knight-toolworks.com/pictures/proto1.zip

[Brady Watson]

Steve,
See attached. I'll let you join up all the vectors. It looks like it is to scale.

-B



SteveProto.zip (http://www.talkshopbot.com/forum/messages/312/SteveProto-32597.zip) (5.7 k)

[dana_swift]

I imported the file without any problem, however I show a lot of layers with no contents..

My drawing shows the dimensions being exactly 76.375x19.25 so I don't understand the problem.

Just curious, what program are you importing it with? PW?

D

[knight_toolworks]

thanks guys. he sent me another copy that was supposed to be 2d but still was 3d. at least in turbocad I could rotate it in 3d.
but I know little about turbocad and could not ge it to give me a version that worked.
the first file may have had a error that caused the wrong size and this one was fixed.

[erik_f]

What kind of speaker is that going into?