Gluing blue foam board

[dubliner]

Hey guys, what type of glue could I use on foam board to atttach it to 1/2" Baltic birch. I'm making a sandwich of the foam between BB & 1x6 SY Pine T&G planks . All of these will go into an angle iron frame to make shop doors. tx Neville - see youse guys in SM soon.

[dray]

use polyurethane.. Gorilla glue.

It will slightly foam to fill any voids so put a little bit of weight on it over night but it is waterproof,long working time, no solvents.

[jamesgilliam]

Neville, Danny is on the button with Gorilla glue. Be sure and follow the directions and it will hold just about anything. I did a sign job that had a bad spot on it, spread a little glue on, hit it with a little water, and the next morning I was able to recut and fix the bad spot. Just be sure and weight it down or clamp it because like Danny said it will foam and expand a bit.