Source for 1/8" ball nose bits??

[myxpykalix]

The 3 places i called, pricecutters, woodline, ect don't carry 1/8" ball nose bits. Does anyone have a specific source for those? Is that something i could find in the "dremel" section of tools? It also would require a different collet? or adapter? If the diameter of the head is the same on a ball nose bit as it is on a round nose bit could i use either one?

[joewino]

I just ordered some from Onsrud. They have an online store at Onsrud.com.

They are not cheap.

[knoxdude]

Try www.MSCdirect.com (http://www.MSCdirect.com) They have pretty much everything. Prices are good too.

Lynn

[hines]

For a cheap one, look here.

http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_core.html#Round_Nose_Anchor

[les_linton]

These guys have all that you will need and a wealth of informations too.

http://www.precisebits.com/default.htm

[wayneo]

For the small bits you might want to try the conical tapered bits if the taper is not a problem for you. They are much stronger.

Look here......... http://www.conicalendmills.com/profile_tools.html

Wayneo

[doug]

Jack, try Bits and Bits (www.bitsbits.net (http://www.bitsbits.net)). I bought some 1/8 inch ball nose solid carbide with .062 tip, i/4 inch shank. on-line price of $13.05