Dust collector bags

[don62]

looking for a good source for replacement bags for dust collectors - we work with solid surface material which creates a dust almost like talcum powder - it will clog the filter on a shopvac in a heart beat, and flows through the factory bags on dust collectors. i have a grizzly g8027 which takes two 14-1/2" X 23" Bags.

[jerry_stanek]

try Pennstate dust collector bags. They have 1 micron bags.

[bcondon]

Grizzley has 3 micron bags for 14.95 ea (G5559)

On Pennstate, it looks like a 1 micron set is $75
but they do not list the size of the bags on the net.. probably need to call 1-800-377-7297

Rockler have Shaker feltbags at $29 each

[the_doctor]

Hi Don, American Fabric Filter Co. are truly the experts in the area of filters. www.americanfabricfilter.com (http://www.americanfabricfilter.com) Call them they love to talk!

[waynelocke]

Don,
You might try "http://www.wynnenv.com/". They sell filters. I use four 4' X 16"D pleated filters with a 7.5HP Cyclone and they work much better than the bags. The owner is very knowledgeable and helpful about the kind and size of the filters. I would give them a call and see if they can help.

[don62]

my thanks to all for the great information. had a great talk today with Dick Wynn of Wynn Environmental (www.wynnenv.com (http://www.wynnenv.com)) and am getting items to modify my existing system. he has the skill and experience to help us all with our dust collection challenges. the guys on the forum come through again. cheers don

[mjindustry]

I ordered the SpunBond Polyester filter today from Wynn. It's going on my 50-760 Delta. Can't wait till it gets here. I love clean air!


http://www.wynnenv.com/35A_series_cartridge_kit.htm

[wberminio]

Thanks Jason

I have an old 2 hp bag filter that I wanted to upgrade to use else where in the shop.The canistor filter seems to be a cost effective alternative.

Erminio