Does anyone have a dxf file of a "Martini Glass"

[brian_uline]

I'm in need of a dxf file of a martini glass. If anyone could help me out I would appriciate it.

Thanks
Brian

[myxpykalix]

you might ask here:
http://www.cnczone.com/forums/showthread.php?t=19346&page=68

[Brady Watson]

Brian,
A Martini glass is very easy to draw in PartWizard using the basic drawing tools. Attached is a file that took no more than 7 minutes to create from nothing using PartWizard and a photo from the net to get proportions correct...including garnish. The photo was in a separate window as an example to glance at. You might want to review the PartWizard video and get a feel for how to draw things like this yourself. The better you get at drawing, the more money you stand to make. Contrary to popular belief, nobody was born with the natural ability to draw...you have to work at it.

You are welcome to use my martini glass file as you see fit, but my hope is that you will try to make out the basic shapes that I used, and imagine how you would go about drawing it yourself. While blatantly asking for completed files is considered faux pas, asking for help on how to draw a file is always welcomed. I'm positive that if you showed that you were making an effort to draw files yourself, that others would freely help you to develop your skills.

-B

The7minuteMartini.zip (http://www.talkshopbot.com/forum/messages/312/The7minuteMartini-23409.zip) (5.6 k)