Free workstation plans how to cut them?

[knight_toolworks]

the ones you get with the machine the pic below. it comes with dxf drawing but I am not sure on the toolpaths. I think they are cut on the line but I wanted to make sure anyone know?

7277

[andyb]

Steve,
If I remember correctly. It's an outside path for the all the parts and inside path for the slots. They way it'll work for what cutting tool you have. I used a 1/4" bit. It is what I have my computer on that is attached to my bot. It is one of the first projects I cut 2 years ago.

Andy B.

[knight_toolworks]

I know the slots are on line as they are only .55 and they are for .75

[andyb]

Steve,
Where did you get the DXF file from? The workstation that I got from Project Wizard does not come with a DXF file, only the SBP files and instructions to cut it. If someone used the File Conversion tool in the SB software to convert it to a DXF then yes it is on the line.

Andy B.

[dray]

They should come in DXF version!

[knight_toolworks]

the files are under the openwood section

workstation parts.zip (http://www.talkshopbot.com/forum/messages/312/workstation_parts-23907.html) (14.1 k)

[bcammack]

That link isn't properly formed, from the looks of it.

[knight_toolworks]

this one works http://www.knight-toolworks.com/cnc/workstation.zip

[andyb]

Since Bill Young created and posted the files, he would be the best to ask.

Andy B.