Parts list for vacumn plemnum/fein system?

[myxpykalix]

I prefer not to have to make a half dozen trips to lowes when i forget parts i need. I have looked at several pictures but don't have a sense for all the parts needed for making the typical system. If anyone has a parts list they could post that might save me some trips back and forth. My intuition tells me to put the controls on the end i will work from the most?

[myxpykalix]

oops... also the outside diameter of the pipe is 2" right? hard to tell from pictures but that was the diameter hole that the bot cut.

[scott_smith]

No, 2" is the ID. They bolt to the table a casting with a female thread that a 2" PVC mail thread screws into.