PDA

View Full Version : The Price of Liberty



khaos
04-21-2009, 11:30 AM
1043


1044
1045


1046
1047

This is from a peice of dimensional lumber I cut from some logs I pulled out of the swamp. Its Oak. about 3" thick. You can see heavy checks and even some worm holes. There is a flag texture in the dish that is hard to see in the pics.

Roughing cut 1/2 endmill 5ips .5 ips plunge 35min
Roughing cut 2 1/4 endmill 4ips .5 ips plunge 1hr
3D 1/8 bullnose 1.6ips .5 ips plunge 8%overlap 18 hrs
Profile 5 ips .5 ips plunge about 6min

pappybaynes
04-21-2009, 12:22 PM
Joe,
that is awesome!
Dick

tmerrill
04-21-2009, 01:23 PM
Great job! Love your use of the wood like that.

Tim

myxpykalix
04-21-2009, 02:57 PM
Very Nice! You may want to get advice on the best finish to bring out all the details (i'm no expert) but i have used gel stains to good satisfaction. Again...good job!

khaos
04-21-2009, 03:03 PM
I was definitely thinking about a gel stain a light colored one that could really bring out some of the details.

The wood was definitely dry but I am getting some significant warping... about 4" with the grain. The work is big enough 26"x18" that you don't really notice. I wonder if I should ignore it or try to steam the part back and brace the back.

gabepari
04-21-2009, 07:40 PM
I bet the pictures don't do it justice, very cool.

Gabe

phil_o
04-21-2009, 08:12 PM
Danish oil is a favorite of mine for hardwood that has a nice natural color. You can test for the results by wiping the wood with some paint thinner. The thinner evaporates quickly and won't do anything that is permanent
By the way, the project is gorgeous.

audiodemon
04-22-2009, 08:28 AM
Great Job! I bet it's gonna pop when finished. Looking forward to more pics.