jhicks
11-11-2007, 11:46 AM
Here are a few photos of a new set of bar signs recently installed in Chicago near the United Center and Oprah Studio.
There are 3 signs. 1 is the LED edge lighted circle Logo blade sign made with diBond exterior and plexiglass insert for edgelighted W
and 2 are 1,1/2" HDU beveled edge letters mounted on matte black Texture Plus foam "driftwood" pattern backboard blanks,mounted on Medex framed back board and all primed with polyurethane sealer.
Circle Logo Blade is 48" diameter, Large panel with BAR & Grill is 25' x 28" and the smaller one is 12' x 28"
Gold pearlescent paint on Beveled edge letters is a latex acrilyc from Crescent Bronze and are mounted on 1" standoffs to elevate them above the matte black faux distressed wood grain background.
Large Letters were beveled with 120 V and small with 90V.
Cheers!
1186
1187
1188
1189
1190
1191
There are 3 signs. 1 is the LED edge lighted circle Logo blade sign made with diBond exterior and plexiglass insert for edgelighted W
and 2 are 1,1/2" HDU beveled edge letters mounted on matte black Texture Plus foam "driftwood" pattern backboard blanks,mounted on Medex framed back board and all primed with polyurethane sealer.
Circle Logo Blade is 48" diameter, Large panel with BAR & Grill is 25' x 28" and the smaller one is 12' x 28"
Gold pearlescent paint on Beveled edge letters is a latex acrilyc from Crescent Bronze and are mounted on 1" standoffs to elevate them above the matte black faux distressed wood grain background.
Large Letters were beveled with 120 V and small with 90V.
Cheers!
1186
1187
1188
1189
1190
1191