hol
12-06-2008, 12:36 PM
Here is an entrance sign monument that we shipped out about a month ago to Bloomington, IN. We received these pictures from our client of it after it was installed--it's nice when we get to see the installed signs.
We had the foamcore monument and columns built for us - then attached our sign face and railings.
The sign is SignFoam3 with a brushed aluminum face. The black areas are .040 aluminum painted a dark metallic grey. We used two 4x8 sheets of aluminum and one 4x10 sheet to cut all the pieces.
The larger text is 3/4" extira painted with 1Shot enamels and the smaller text is .25" PVC.
1321
1322
Larry
www.brfsigns.com (http://www.brfsigns.com)
We had the foamcore monument and columns built for us - then attached our sign face and railings.
The sign is SignFoam3 with a brushed aluminum face. The black areas are .040 aluminum painted a dark metallic grey. We used two 4x8 sheets of aluminum and one 4x10 sheet to cut all the pieces.
The larger text is 3/4" extira painted with 1Shot enamels and the smaller text is .25" PVC.
1321
1322
Larry
www.brfsigns.com (http://www.brfsigns.com)