HSD 2.2hp spindle...

[geneb]

Can someone point me to where I can find mechanical drawings for the HSD 2.2hp spindle?

thanks!

g.

[harryball]

I think this is the correct company...
www.hsdusa.com (http://www.hsdusa.com) should take you to the English site. From there you should be able to search for your model number under products.

Robert

[geneb]

Thanks for the tip Rob. Unfortunately while the site has the manual, there's no dimensions listed in it and I don't see any place on the site to find them.


All I really need to know is the diameter of the spindle nose.

g.

[bthoron]

The "nose" is ~2.95" the spindle shaft is ~1.175"

[geneb]

Thanks Ben! I'm going to start working on a bracket to hold an air nozzle and wasn't near my 'bot.