PDA

View Full Version : Help with Vectors



gary_k
02-01-2009, 11:27 PM
I have created a 32" diameter vector and I need to divide it in to 12 equal pie shape pieces - any suggestions? I have a PRS Alpha and ArtCam Pro. Thanks, Gary

garyb
02-02-2009, 09:10 AM
draw 1 vector from the center to outer edge in the starting location you want such as 12 o'clock then do a radial copy

Call-Tech
02-02-2009, 09:14 AM
I don't know how to do that in Artcam, but here is 32" circle divided into 12. I have Flexisign and it is easy in that.




8394 (3.6 k)

john_l
02-02-2009, 07:06 PM
Fred, I also use Flexi. What was your tool for doing that pie?

Call-Tech
02-03-2009, 07:21 PM
Create Circle or any Vector shape. Select it. From Effects menu, Stripe tool, Radiant 50%, # equals number of divisions desired divided by 2.

-Fred

gary_k
02-12-2009, 03:41 PM
Hey thanks for the input - I appreciate all of the advice you gave. I finally figured it out under vector tools, block copy/rotate. Sometimes you just need to hear from other people to get on the right track.