rcnewcomb
06-06-2009, 02:04 AM
I decided to pass on this project since it is too different from our normal work. I have the STL file in addition to a drawing in PDF format.
This object is about 13" in diameter. It would need to be machined out of some type of plastic. It could be made in pieces and assembled.
The customer is located in western Alaska.
Contact me if you are interested and I'll connect you with the customer. My e-mail is in my profile.
8463
This object is about 13" in diameter. It would need to be machined out of some type of plastic. It could be made in pieces and assembled.
The customer is located in western Alaska.
Contact me if you are interested and I'll connect you with the customer. My e-mail is in my profile.
8463