khalid
12-25-2008, 05:40 AM
Recently i am/been busy to produce some wood work for an upcoming yearly event at my community... This event is Funfair and we have every type of stall and fun games for the full day here... All the money (profit) goes to local community charity...
Last year i had a Stall of woodworking and we ( Me and my wife) really enjoyed it... Many peoples amazed to see our wood work bcas we are not wood worker by profession....You can see my Stall pictures at following link
http://www.cnczone.com/forums/showthrea ... 588&page=8
Next month we have it again so trying to make few interesting things... Mostly ladies like some stuff related to Kitchen and there interests...so i designed a simple Salad platter...This is the first rain drop and i have lot to go... time is very short here
In the bottom i will place 04Ea ,1/2" round wooden plugs for placing it on table..also i will round the bottom periphery for 3D look
Any suggestions from u are welcome...
Information:
Tool used
A- Profile cut= 3mm end mill
B- V-carving = 12mm 90 degree V-bit
C-Pocketing = 8mm straight end mill
Softwares:
1- Vectric Vcarve Pro 4.6 for all above toolpath generation
2- Mach3 Quantum (latest version)
Wood:
Type = Mango wood
Thickness= 5/8" (~15.8mm)
Dimension = 300mm x 245mm
1581
1582
1583
1584
1585
1586
Last year i had a Stall of woodworking and we ( Me and my wife) really enjoyed it... Many peoples amazed to see our wood work bcas we are not wood worker by profession....You can see my Stall pictures at following link
http://www.cnczone.com/forums/showthrea ... 588&page=8
Next month we have it again so trying to make few interesting things... Mostly ladies like some stuff related to Kitchen and there interests...so i designed a simple Salad platter...This is the first rain drop and i have lot to go... time is very short here
In the bottom i will place 04Ea ,1/2" round wooden plugs for placing it on table..also i will round the bottom periphery for 3D look
Any suggestions from u are welcome...
Information:
Tool used
A- Profile cut= 3mm end mill
B- V-carving = 12mm 90 degree V-bit
C-Pocketing = 8mm straight end mill
Softwares:
1- Vectric Vcarve Pro 4.6 for all above toolpath generation
2- Mach3 Quantum (latest version)
Wood:
Type = Mango wood
Thickness= 5/8" (~15.8mm)
Dimension = 300mm x 245mm
1581
1582
1583
1584
1585
1586