Just finished

[radavis]

I made this for my motherlaw, want to thank every one for there help.

1632

1633

[myxpykalix]

Very nice robert. Did you use the "CMYK method" to color your lithopane? What is the overall size of your project? good job.

[radavis]

yes I had a friend of my that has a high end printer do the pic, over all is 9" X 12" I used a 60 deg bit and did the lith in one pass the lith is 4"x6"

[handh]

Great Job Robert,

OK what is the CMYK method to color the lithopane.

Thanks,

[radavis]

there is a very creative gentman on here that came up with the idea, he is on http://vectric.com/forum/
he took and print the pic on milar and then glue to the lith.
he also can up with the way to cut it in one pass

[radavis]

here the post on vectric that I used to make my lith, this guy is very good and does great looking stuff.

http://vectric.com/forum/viewtopic.php?f=16&t=2937&p=19021&hilit=lithophane #p19021